Toggle your device’s power, adjust its voltage, unlock eGive, and update firmware – wirelessly, all from one convenient location.
FK Irons’ Power Solutions enable direct drive machines to be used with eGive. In addition, you can easily keep your device’s firmware up to date through the Darklab app for iOS. With wireless control of FK Irons and Darklab devices, artists gain maximum control.
Please note that the latest version of the Darklab app is not compatible with older versions. To ensure better functionality and continued Bluetooth® connectivity and in-app controls, all users must update both the Darklab iOS app to Version 1.13 and their device’s current firmware.
This impressive upgrade was proudly designed and developed by the FK Irons team in the USA, and it is a breakthrough for artists worldwide.
Current Darklab App Features:
- Hover
- Customizable Voice Control via Siri
- Voltage Adjustment
- Power ON/OFF
- Control eGive
- Update Firmware
- LightningBolt
- Customizable Voice Control via Siri
- Voltage Adjustment
- Power ON/OFF
- Control eGive
- Check Battery Charge Level
- Update Firmware
- PowerBolt (Flux and EXO)
- Update Firmware
- Enable eGive
- Controlled via keypad
- LightningBolt UNI
- Customizable Voice Control via Siri
- Voltage Adjustment
- Power ON/OFF
- Control eGive
- Check Battery Charge Level
- Update Firmware
- AirBolt
- Voice Control via Siri
- Voltage Adjustment
- Power ON/OFF
- Control eGive
- Check Battery Life
- Update Firmware
- AirBolt Mini
- Voice Control via Siri
- Voltage Adjustment
- Power ON/OFF
- Control eGive
- Check Battery Life
- Update Firmware
- ...
- Bellar Air
Voice Control via Siri
Voltage Adjustment
Power ON/OFF
Control eGive
Check Battery Life
Update Firmware
Device Screen:
- A signal strength status icon will be present on each device.
- li>Holding down the device icon will prompt a new pop-up menu to appear, allowing you to enable the following options:
- Re-name device
- Siri prioritization (excluding PowerBolt)
- Remove device
Help Menu Screen:
- A new button will link to Darklab’s FAQ web page.
Power Control Panel:
- Animated buttons will match the pushed buttons on the selected physical device.
Firmware Screen:
- The currently installed version is now displayed above the update button.
- Under the firmware icon, a new update notification will appear to inform users of available firmware updates.
- If an error occurs during an update, a code for technical support reference will be displayed.
Settings Screen:
- Resolution (Allows you to change the voltage precision by increments of 0.1 volts or 0.5 volts.)
- Automatic LED fading (excluding PowerBolt II, PowerBolt II+, and BellarAir) (Fades LED brightness automatically from high to low.)
- Manual LED Dimmer (excluding PowerBolt II, PowerBolt II+, and BellarAir) (Allows you to adjust LED brightness with a slider from high to low or vice versa.)
- KillSwitch (Allows you to synchronize or de-synchronize KillSwitch(es) seen in the Devices page.)
개요
Darklab 범주 비즈니스 Darklab Tattoo Supply개발한에서 Freeware 소프트웨어입니다.
Darklab의 최신 버전은 2024-01-24에 발표 된 1.13. 처음 2024-01-24에 데이터베이스에 추가 되었습니다.
다음 운영 체제에서 실행 되는 Darklab: iOS.
Darklab 사용자 2 5 등급으로 평가 했다.
관련된 제품
2024-11-08 | RegCool 2.015 |
2024-11-08 | Visual Studio Code 1.95.2 |
2024-11-08 | Calibre 7.21.0 |
2024-11-07 | Microsoft Edge 131.0.2903.27 |
2024-11-07 | Vivaldi Browser 7.0.3495.11 |
최신 리뷰
IObit Uninstaller
IObit Uninstaller: 효율적인 소프트웨어 제거를 위한 솔루션! |
|
Java SE Development Kit
Oracle의 강력한 Java 개발 도구 |
|
Visual Studio Code
강력하고 다재다능함: Visual Studio Code는 개발자의 가장 친한 친구입니다. |
|
UltraISO
모든 디스크 이미지 요구 사항을 충족하는 강력한 ISO 관리 도구 |
|
Cisco LEAP Module
Cisco LEAP 모듈로 네트워크를 보호하십시오. |
|
Comprobación de estado de PC Windows
Optimiza el rendimiento de tu PC con Comprobación de estado de PC Windows |